200 mA X-Ray Unit  

It is a kind of universal X-Ray unit with two-focuses, single-bed and one direction rotating anode X-Ray tube.

It can be used for fluoroscopy, intestine-stomach examination, radiography with beam-filter, common radiography and other routine diagnoses.

It mainly consists of high-voltage generator, rotating anode X-Ray tubes, spot-film device, diagnoses bed and vertical pillar. The spot-film device can hold whole, half or quarter film.

Specifications:

SX200-I

SX200-II

Max. DC output voltage: 100KV
Max. output currency:     200mA. 
Both KV and mA adjustable.

Max. DC output voltage: 125KV
Max. output currency:    200mA

Specifications (click)

100 mA X-Ray Unit

It is a kind of universal X-Ray unit with two-focuses, single-bed and one anode X-Ray tube.
 
SX100-I  
Specifications:
Max. DC output voltage:  90KV
Max. output currency:     100mA. Both the KV and mA are adjustable.
 

SX100-III
 
Max. DC output voltage: 100KV
Max. output currency:   125mA.

Specifications(click)

50 mA diagnostic X-Ray unit 

Model SX50-II

It features two-focus X-ray tube and full-wave rectification. And can be used in perspective radiography,grid radiography and gastroenteric regular radiographing test.

This kind of X-ray unit is composed of combined X-ray bulb, control room, electrodynamic bed and pillar etc.

Main technical parameters£º

Supply power 220VAC 50HZ
Fluoroscopy capacity Tube 40~90KVP (adjustable in 11 steps)
Tube current: 2~5mA (adjust continually)
Radiography capacity: Tube voltage:  40~90KVP( adjustable in 11 steps )
Output mAs value( tube current 50mA )in 8~320mAs are variable in 23 steps according to the R10 series.
Specification of spot film manipulating mode
Full piece
5" x7" 8" x10"
Bipartition piece
5" x7" ( two pieces ) pieces)
Gyrating range of examining bed 90* ~0 ~-5*