SEMI-AUTOMATIC BIOCHEMICAL ANALYZER MODEL BA-2000III

Features:

*   perfect lab managing system under the computer controlling

*  print complete report（ including patient information and the examination result）

*  computer can save at least for 2 years biochemical examination results， and make statistic works on it.

*  no quantity limit for saving standard curves（ linear or non-linear）

*  automatic diagnosis of the course, automatic monitoring and alarm

*  quality controlling system can record and analyze the results within at least 2 years, print Levy-Jenning quality controlling chart, X¯, SD, CV%

Specification:

-          light system: quartz halogen lamp 12v / 20w

-          wave length: interference filter: 340nm, 405nm, 492nm, 510nm, 546nm, 578nm, 630nm

-          semi-bandwidth: 8-12nm

-          ABS limit: 0.000-2.500ABS

-          Differentiate rate: 0.001ABS

-          Wave moving: 0.002A / h

-          Colorimeter system: stainless steel / quartz flowing 32ul

-          Temp: room temp, 25ºC, 30ºC, 37ºC interchangeable, accuracy: 0.1ºC

-          Inter-cross pollution: <2.0%

-          Scattering light: <1% (340nm)

-          Sample volume: 200ul –2000ul adjustable

-          Analysis modes: ABS, end point, continuous monitoring

-          Output: RS232, standard PC

-          Working condition: temp: 15ºC - 30ºC

  Humidity: 85% R.H

-        Power: AC220V, 50 / 60Hz

BA-800 SEMI-AUTO BIOCHEMICAL ANALYZER

Features:

l      The operation system based on windows.

l      Measurement modes: dynamics, two points, linear end point, non-linear end point, absorbance, single  and double wavelength, sample (reagent) blank.

l      Automatically print the general report or the report of any item or sample, or print the reports according to the date, the sample number or the patient number.

l      Quality control system can show all the statistic results and quality control charts within 31 days

l      Auto feeding, printing, storing and adjusting wavelength.

l      Auto self-diagnosis and indication of problems.

l      Concave grating is used, better than plane grating. The wavelength is adjustable continuously.

Specifications:

Light system: 12V, 20W halogen tungsten lamp

Wavelength range: 330nm~800nm (continuous)

Wavelength accuracy: ±1nm

Absorbance range: -0.3~3.0Abs

Resolution: 0.001Abs

Stability: <=0.002Abs/hour

Intercross Pollution: <=1%

Colorimetry system: light path 10mm, 32ul.

Temp control: 25ºC, 30ºC, 37ºC or room temp +0.1ºC, auto control

Sample Volume: 100-2000ul adjustable

Monitor: LCD colorful

Printer: external high resolution printer

Interface: RS232 dual direction interface

BIOCHEMICAL ANALYZER MODEL BA-811

Features:

*  The microprocessor adopts DOC technology

*  16-key board and mouse for operation

*  large LCD display. It will display operating steps and indicate status

*  You just follow the indication to set parameters and quality controlling samples, each standard curves for items.

*  sample examination, record management( save 25000 records)

*  print the whole examination report, save and restore the data even after power–off.

*  save 120 items:

I – have saved 40 parameters for common use

II – users can set items or edit parameters or save permanently.

*  display the whole course:

I – diagnosis of abnormal cases such as bladder disturbance to test again

II – auto modification of abnormal samples, recalculate the result and no need to measure again.

*  complete testing modes: EP, FT, RA, double wave-length, sample blankness

*  real time quality control: I – can set 2 quality controlling samples for each items

                        II – can display statistics and curve of quality control, image and print reports within 30 days

                        III – RS232 dual direction output

*  reliable calibration mode: six standard curves

*  Automatically print the general report or the report of any item or sample, or print the reports according to the date, the sample number or the patient number.

Specification:

-          light system: halogen lamp 6v / 10w

-          wave length: 340nm –700nm.  9 wave lengths for option:

I – standard: 340nm, 380nm, 405nm, 510nm, 545nm, 578nm, 630nm

II –2 optional between wave length: 450nm, 492nm, 650nm, 690nm

III – bandwidth: 8-12nm

-          Absorbance: 2.5ABS

-          Resolution: I – display: 0.001ABS

        II – inter calculation: 0.0001ABS / h

-          accuracy: CV <= 1%

-          Stability: + 0.003 ABS / hour after 10 minutes warm-up

-          Inter-cross pollution: <1.5%
 

-          Cuvette: I – 50ul micro flowing cell

II – temp control: 25, 30, 37ºC+ 0.2ºC

III -- Sample volume: 200ul –2000ul adjustable
 

-          monitor: 10.4’’ LCD display for model XD811L

-          16 soft keys

-          External ink jet printer

-       power: 176-264V  / 50HZ, 150VA

-          Working condition: temp: 10ºC - 35ºC

 Humidity: 0-95% R.H