SV-2000A VENTILATOR

Specifications(click)

 

Heated Respirator Humidifier

Main technical specifications

Use Temperature           30~37ºC

Highest Temperature        85ºC

Max Water Volume         280ml

Max Flow                 180L/min

Max Work Pressure         20kPa

Power                   220V 50Hz

Dimension             135x170x150mm

Weight                   1.3kg

 

Air-Oxygen Blender

Main technical specifications

Oxygen Concentration Control Range    21~100%

Inputs Compressed Air Pressure        0.3~0.4Mpa

Inputs Oxygen Pressure               0.3~0.4Mpa

Alarm Pressure Difference          0.06~0.30Mpa

Max Tidal Volume                   1200ml

Min Tidal Volume                    200ml

Use Ambient Temperature          +5ºC~+40ºC

Use Ambient Humidity             ≤80%

Dimension                      115x87x128mm

Weight                           1.4kg

Oil-Less Air Compressor

The main assembly units are imported, the compressor has the advantages of outputting clean and dry air without oil, low noise small volume, long life, high reliability, and convenient operation. This machine is mainly used in the field which needs gas source, such as automatic respirator, high-speed turbine pneumatic drill, and oral spraying therapy.

Main technical specifications:

Highest output pressure        0.7Mpa(7Kgt/cm)

Output capacity              2.5-14m3/h

Total noise                  <55dB

Power: single, phase          220V 60/50Hz

Total rated power            250w

Dimension              460x310x850mm

Weight                  50kg

 

　

SC-300 multi-functional ventilator

SC-300 multi-functional ventilator is a pneumatic driven, electronic controlled suitable for patients of all ages (from prematures to adults).

 SC-300 ventilator adopts a dual-microprocessor system and integrates most of modern ventilation modes including hundred percent oxygen enrichment, sigh function and medicament nebulization. 

It also has monitoring functions with audible and visual alarm. 

To make it easy for emergency use the SC-300 ventilator has an additional key for "emergency". When use the emergency function, all that required is to set a O2 concentration and inspiratory pressure. 

With a well designed structure, new ventilation mode can be easily added to SC-300 ventilator by upgrading its software without changing any hardware.

Features:

1.For patient of all ages
2.Pneumatic driven, electronic controlled. Wide selection of ventilation modes. Volume constant, Pressure control, Pressure support etc. 
3.Dual-microprocessor system, high reliability.
4.Monitoring of airway pressure and ventilation volume.
5.Advertisement of operation for easy use.
6.Build-in alarm function for safety.

Main Specifications:
1.Ventilation frequency: IPPV:5~60bpm SIMV:1~12bpm
2.Inspiratory flow: Infant:4~24L/min (continuous) Adult:10~120L/min (inspiratory phase)
3.Inspiratory time:0.2~3s
4.Insperatory pause: 0 -2s [for IPPV (VC) and SIMV]
5.Peak pressure:1~9kPa
6.Inspiratory oxygen concentration:21~100%
7.PEEP/CPAP:0~1.5kPa
8.Pressure support:0~3.5kPa
9.Trigger sensitivity: -0.1~1.0kPa
10. Ventilation modes: Adult: IPPV(VC), PPV(PC), SIMV, SIMV+PSV, CPAP, PSV Infant: IPPV (PC), IMV, CPAP, Pressure Limit, Time Cycle. Emergency: IPPV (PC) (O2 concentration, inspiratory pressure key active only)
11. MV monitoring: Upper Limit:5 - 40L/min Lower Limit:0~20L/min
12. Airway pressure monitoring: Pmax, Pmean, Pplat, PEEP
13. Ventilation monitoring: Frequency, Minute Volume, Tidal Volume
14. Alarms: Air supply deficiency, Oxygen supply deficiency, Hose detachment, Airway pressure high, Airway pressure low, MV high, MV low, Apnea, Power failure